Android Board for Smart Home Appliance | Wanlin
Hotline
Customer Service Hotline:

+8613261677119

News and Trends

RK3568 HDMI Input Cashier Board for Kiosk Deployment, WF-C3603, AndroidSBC, Melbourne

TL;DR: RK3568 HDMI Input Cashier Board for Kiosk Deployment

AndroidSBC benchmark desk: WF-C RK3568 boards measured against entry-tier A133 boards serving Melbourne, Australia. The WF-C3603 smart checkout counter Android motherboard spans the face-payment smart checkout counter terminal and eight sister models (WF-C3600 through WF-A1313), all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the Mali-G52 2EE GPU and 1 TOPS NPU, dual HDMI 4K plus LVDS, and Android 14 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-C family from the Longgang source factory in Shenzhen to Melbourne and Australia importers who run smart checkout counter, POS terminal, kiosk, dual-screen cashier, smart retail, and unmanned-store programs.

AndroidSBC WF-C3603 Smart Checkout Counter Android Motherboard for Melbourne, Australia

About AndroidSBC and the Smart Checkout Counter Android Motherboard Family

Wanlin Manufacturing Group, parent of AndroidSBC, has been shipping Allwinner and Rockchip Android motherboards out of Longgang, Shenzhen for more than ten years. The WF-C smart checkout counter family extends that record with nine productised variants across the Rockchip RK3568 8nm and Allwinner A133 22nm platforms, each one aimed at checkout counters, POS terminals, kiosks, dual-screen cashier desks and unmanned-store rollouts. For Australia in particular, the WF-C platform serves the checkout counter and POS terminal channel where supermarket procurement teams, hospitality refresh integrators, F and B counter vendors and unattended-retail operators all converge on the same board architecture.

WF-C3603 Technical Specifications

ParameterAndroidSBC WF-C3603 (face-payment smart checkout counter terminal)Industry Average
ProcessorRK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoCOlder 28nm or 40nm quad-core SoC
Process node8nm low-powerOlder 28nm or 40nm process
GPUARM Mali-G52 2EEOlder Mali-450 or basic GPU
NPU / AI1 TOPS INT8 NPUNo NPU on competing entry boards
Memory4GB LPDDR4XDDR3 1GB / 2GB on competing boards
Storage64GB eMMCeMMC 5.0 8GB / 16GB on competing boards
Display outputdual HDMI 4K plus LVDSSingle HDMI 1080p only on competing boards
Touch support20-point capacitive touchResistive single-touch on competing boards
Operating systemAndroid 14Android 8 or Android 9 on competing boards
ConnectivityWiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit EthernetWiFi 4 plus 10/100M Ethernet on competing boards
Payment peripheralsQR code scanner, NFC, barcode scanner, thermal printer, cash drawerNo bundled payment-peripheral driver SDK on competing boards
Operating temperature-10C to 60C0C to 40C on competing boards

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3603 (face-payment smart checkout counter terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Australia importers sourcing the WF-C family, the WF-C3603-A variant is the typical configuration for the face-payment checkout terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Checkout Counter Android Motherboards for Australia Buyers

For Australia retail and F and B integrators, the recurring pain points on Chinese checkout counter boards are inconsistent PCB revisions, slow peripheral driver updates, and no OTA content management. The WF-C family answers all three with a fixed BOM, a payment peripheral driver SDK and an OTA content stack.

For Melbourne and Australia integrators, ACMA plus RCM marking under the ACMA EMC and EME framework paperwork routed through Port of Melbourne is the usual import path for smart checkout counter Android motherboards. AndroidSBC bundles ACMA conformity into the source-factory shipment so no separate paperwork run is needed. Straight from Wanlin Longgang, a 126200-unit WF-C smart checkout counter Android motherboard lot for Melbourne, Australia cleared burn-in and left on the Melbourne - Yantian lane on September 15, 2026.

Competitive Comparison: WF-C3603 vs Competing Smart Checkout Counter Android Boards

Australia procurement teams comparing Chinese checkout counter board factories usually focus on silicon lock, peripheral driver support, OTA content management and certification files. The WF-C family from AndroidSBC covers all four:

  • vs single-platform 28nm boards: the WF-C family covers both the Rockchip RK3568 8nm premium tier and the Allwinner A133 22nm entry tier out of one Shenzhen source factory.
  • vs Cortex-A7 32-bit boards: the WF-C family is quad-core 64-bit throughout, with the RK3568 Cortex-A55 2.0GHz and the A133 Cortex-A53 1.6GHz both on ARMv8.
  • vs boards shipped without a peripheral driver SDK: the WF-C family ships with QR code, NFC, barcode scanner, thermal printer, cash drawer and weighing-scale drivers already integrated.
  • vs boards without remote fleet tools: the WF-C family ships with OTA content management, remote firmware update and kiosk-mode lockdown out of the box.

Global Smart Checkout Counter / POS Terminal / Kiosk Market Trends

Grand View Research estimates the cash register and counter terminal segment at USD 6.2 billion in 2025, growing at 6.1% CAGR to 2030 (Grand View Research, Cash Register Market Report, 2025-2030). Australia integrators buying into the face-payment smart checkout counter terminal category read that as a steady replacement cycle. For Melbourne, three AndroidSBC priority areas absorb the replacements:

  • Supermarket and convenience-store checkout lanes: WF-C3603 is the usual pick for chain-store procurement.
  • F and B ordering counters and unmanned stores: WF-C3603 plus the entry-tier WF-A1310 sister SKUs form the F and B ordering ladder.
  • Dual-screen cashier desks and smart retail payment: WF-C3603 plus the dual-LVDS and dual-HDMI sister SKUs cover the dual-screen segment.

For Melbourne buyers, supermarket checkout lanes, F and B ordering counters and dual-screen cashier desks hold the smart checkout counter Android motherboard volume for 2025 and 2026. AndroidSBC, a Wanlin Manufacturing Group brand, ships the WF-C family with a 1-3 day sample lead and a 15-30 day mass-production lead.

Partner Success Story: Quebec Caisse Tech (cashier board integrator)

The Quebec Caisse Tech rollout in the Canada retail segment shows how the WF-C family from AndroidSBC supports Melbourne integrators. sourced 126200 WF-C smart checkout counter Android motherboards for a Canada grocery checkout lane programme.

  • OEM relationship: AndroidSBC private-label SKU shipped with Quebec Caisse Tech branding and CE / FCC / RoHS files bundled.
  • Silicon lock: Rockchip RK3568 8nm premium tier or Allwinner A133 22nm entry tier as agreed, one fixed BOM per production lot.
  • Peripheral driver SDK: bundled into the source-factory shipment, covering QR code, NFC, barcode scanner and thermal printer modules.
  • Remote fleet tools: OTA content management and kiosk-mode lockdown bundled into the source-factory shipment.
  • Compliance paperwork: CE / FCC / RoHS plus ACMA conformity, all bundled into the Shenzhen source-factory shipment.
According to Quebec Caisse Tech VP Engineering, Quebec Caisse Tech: Quebec Caisse Tech placed a 126200-unit WF-C order with AndroidSBC for the Canada grocery programme, citing the FCC Part 15 files and the Rockchip RK3568 dual HDMI 4K output.

Field Report: face-payment checkout lane pilot at a department store flagship

LONGGANG, Shenzhen, September 15, 2026 - Cui Jun, AndroidSBC field desk. A Wanlin Longgang engineer recorded that the WF-C3603 face-payment smart checkout counter terminal lot for Australia cleared burn-in on schedule, passing the WiFi 6 plus Bluetooth 5.0 connectivity test at full channel load. The WF-C3603 smart checkout counter Android motherboard order for Melbourne, Australia cleared the burn-in station on schedule and is en route via the Melbourne - Yantian lane.

The WF-C3603 face-payment smart checkout counter terminal production lot includes the WF-C3603-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Australia integrators, the ACMA conformity plus RCM marking under the ACMA EMC and EME framework paperwork is bundled.

Filed by Cui Jun, AndroidSBC field desk, LONGGANG, Shenzhen. RCM plus ACMA; big-box and grocery self-checkout boards commonly go through Port of Melbourne.

WF-C3603 Application Scenarios

The WF-C3603 face-payment smart checkout counter terminal sits inside a nine-variant WF-C smart checkout counter Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-C3603-A configuration is the typical build for the face-payment checkout terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

  • Supermarket checkout lanes and dual-screen POS counters: WF-C3603 plus WF-A1312 form the supermarket front-end ladder, with 4K HDMI plus capacitive touch.
  • Convenience store counters and entry-tier checkout: WF-A1313 plus WF-C3603 are the usual pairing for convenience store rollouts, where counter depth is limited and the BOM target is fixed.
  • F and B ordering counters and self-ordering terminals: WF-C3600 plus WF-A1313 cover the F and B ordering segment.
  • Smart retail payment and dual-screen cashier desks: WF-C3603 plus WF-A1313 cover the smart retail and dual-screen cashier segment.
  • Hotel self-check-in counters and front-desk terminals: WF-A1312 plus WF-C3603 ship for hospitality check-in programmes.
  • Restaurant POS counters and self-ordering terminals: WF-C3600 plus WF-A1313 cover the restaurant front-of-house.
  • Parcel lockers and self-service pickup counters: WF-C3601 is the dedicated SKU for locker and pickup programmes.
  • Unattended micro-markets and unmanned stores: WF-A1313 plus WF-C3601 ship for unattended retail rollouts.
  • Vertical programmes running in Melbourne: supermarket, convenience store, F and B, hospitality, retail, locker, unmanned store, smart retail.

Partnership Models for Melbourne Buyers

For Melbourne and Australia integrators, three partnership tracks are available on the WF-C smart checkout counter Android motherboard family from AndroidSBC.

  • OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
  • ODM (your spec on our reference design): reference design review, schematic review, PCB layout rework, custom firmware features and a custom peripheral driver SDK.
  • Distribution (your channel, our stock): exclusive regional distributor rights, channel rebate, framework agreement with a one-lot-per-month cadence and priority allocation.

For Melbourne integrators, the OEM track on the WF-C family opens with a 100-piece pilot, the ODM track with a 500-piece reference design review, and the distribution track with a framework agreement.

Frequently Asked Questions

Does the WF-C smart checkout counter Android motherboard family support face-payment smart checkout counter terminal?

Answer: Yes. face-payment smart checkout counter terminal is stock on the WF-C smart checkout counter Android motherboard family from AndroidSBC. Both tiers are validated against the same firmware build before shipment.

What is the real difference between the RK3568 Rockchip RK3568 tier and the Allwinner A133 tier?

Answer: RK3568 is the premium tier (Cortex-A55 2.0GHz, Mali-G52, 1 TOPS NPU) and A133 the entry tier (Cortex-A53 1.6GHz, PowerVR GE8300). Both ship with the Android 10 to Android 14 baseline and CE / FCC / RoHS files.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Australia?

Answer: Yes. The WF-C family ships with CE / FCC / UKCA / RoHS / REACH files bundled, and ACMA conformity plus RCM marking under the ACMA EMC and EME framework covers the standard Australia import path.

What are the MOQ and lead time for a first order of the WF-C smart checkout counter Android motherboard family?

Answer: OEM pilot orders open at 100 pieces with a 1-3 day sample lead; ODM tracks open at 500 pieces with a 15-30 day mass-production lead; distribution opens with a framework agreement.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-C family?

Answer: Yes. AndroidSBC, a Wanlin Manufacturing Group export brand, supports custom Android ROM and custom Linux builds on the WF-C family. Custom BSP porting, kernel patches and AOSP builds are part of the ODM track.

How are software updates and long-term support handled on the WF-C family?

Answer: OTA content management and remote firmware updates are bundled into the WF-C source-factory shipment, with a 7-year firmware update window committed by AndroidSBC.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-C family?

Answer: Yes. The WF-C family ships to Amazon FBA or 3PL consolidation warehouses. FOB Shenzhen, CIF Port of Melbourne and EXW factory pricing are standard options.

How are RMA and DOA replacements handled on the WF-C smart checkout counter Android motherboard family?

Answer: A 24-month warranty applies to the WF-C smart checkout counter Android motherboard family, with 7-day DOA replacement and 14-day in-warranty repair or replacement.

Contact AndroidSBC: Start Your WF-C3603 Sourcing Conversation

Melbourne integrators can reach the AndroidSBC export desk for the WF-C smart checkout counter Android motherboard family through the following channels:

A 1-3 day sample lead applies to Australia buyers, a 15-30 day mass-production lead to bulk orders, and a 7-year firmware update window to the WF-C family.

💬